Tag: 110-70-3

110-70-3, N1,N2-Dimethylethane-1,2-diamine is a chiral-nitrogen-ligands compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Preparation of N-tert-Butoxycarbonyl-N, N’-dimethylethylenediamine; Lambda/,Lambda/-dimethylethylenediamine (1.O g, 11.3 mmol) was dissolved in anhydrous dichloromethane (10 ml.) and was treated with triethylamine (1.6 ml_, 1 1.3 mmol). The mixture EPO was cooled to 0 C for the addition of di-terf-butyl dicarbonate (2.5 g, 1 1.3 mmol). The reaction stirred for 30 min at 0 C then 2 hours at room temperature. The reaction mixture was then washed with water (10 ml.) and the aqueous layer extracted with further portions of dichloromethane (2 x 10 ml_). The combined organic phases were dried over NaaSCu and the solvent removed in vacuo. Purification by column chromatography (40:8:1 , dichloromethane:methanol:aqueous ammonia) yielded (508 mg, 24 %) of the desired N-tert- butoxycarbonyl-N,N’-dimethylethylenediamine as a colourless oil.

As the paragraph descriping shows that 110-70-3 is playing an increasingly important role.

Reference£º
Patent; BIOTICA TECHNOLOGY LTD.; WO2007/26027; (2007); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.110-70-3,N1,N2-Dimethylethane-1,2-diamine,as a common compound, the synthetic route is as follows.

To a solution of N,N’-dimethylethylenediamine (300 mg) in DMF (2.0 mL) was added K2CO3 (1.0 g) and compound B (466 mg). The mixture was heated at 80C for 3h. Solvent was evaporated and the residue was extracted with DCM and then purified by a prep-TLC plate (10%MeOH/DCM with 1% NH3 in methanol) to give product as a yellow solid (400 mg, yield 75%).

As the paragraph descriping shows that 110-70-3 is playing an increasingly important role.

Reference£º
Patent; ARIAD PHARMACEUTICALS, INC.; ZHU, Xiaotian; WANG, Yihan; SHAKESPEARE, William, C.; HUANG, Wei-Sheng; DALGARNO, David, C.; WO2013/169401; (2013); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.110-70-3,N1,N2-Dimethylethane-1,2-diamine,as a common compound, the synthetic route is as follows.

General procedure: To a cooled to 0 C suspension consisting of N,N’-dimethyl-1,2-ethylenediamine (4.4 g, 0.05 mol), sodium bicarbonate (33.6 g, 0.40 mol), and CH2Cl2 (50 mL), a solution of 2-bromopropionyl chloride (1a) (25.7 g, 0.15 mol) in CH2Cl2 (40 mL) was added. The reaction temperature was maintained within 0-5 C and the addition time was 40 min. The mixture was stirred for 4 h at the same temperature. Water (130 mL) and CH2Cl2 (60 mL) were added and the organic layer was separated. The combined organic fractions were dried over sodium sulfate. The solvent was removed under reduced pressure. The residue was treated with hexane (30 mL) and a solid product was filtered off and recrystallized from diethyl ether to give pure compound 2a (13.25 g, 74%), m.p. 77.0-77.4 C (from diethyl ether).

The synthetic route of 110-70-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Goncharova; Yakushchenko; Raevskaya; Yakushchenko; Konovalova; Russian Chemical Bulletin; vol. 68; 1; (2019); p. 181 – 185; Izv. Akad. Nauk, Ser. Khim.; 1; (2019); p. 181 – 185,5;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.110-70-3,N1,N2-Dimethylethane-1,2-diamine,as a common compound, the synthetic route is as follows.

The compound N,N’-dimethylethylenediamine (20 g, 0.226 mol)Soluble in 100mL of dichloromethane,50 mL of Boc anhydride (14.8 g, 0.068 mol) was added dropwise in an ice water bath.Dichloromethane mixture,Drop the room temperature reaction,The progress of the reaction was monitored by TLC (DCM: MeOH = 10:1). filter,The dry filtrate was concentrated under reduced pressure at 40 C.After the column, the product was 9g.

The synthetic route of 110-70-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Sichuan Bai Li Pharmaceutical Co., Ltd.; Zhu Yi; Li Jie; Wan Weili; Zhuo Shi; Li Gangrui; (28 pag.)CN109106951; (2019); A;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

110-70-3, N1,N2-Dimethylethane-1,2-diamine is a chiral-nitrogen-ligands compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

The above mentioned protocol was adapted for preparation ofligand L2. In a solution of 2-(chloromethyl)-3,4-dimethoxypyridinehydrochloride (2.09 g, 9.34 mmol) in 10 mL of water, a solution ofpotassium bicarbonate(2.73 g, 19.74 mmol) in water (10 mL) wasadded dropwise. The reaction mixture was stirred at room temperaturefor next 30 min. After stirring is done, solution was extractedwith dichloromethane (3 20 mL). The combined dichloromethanelayer was treated with anhydrous sodium sulfate. Thesolution was filtered and solvent was removed by rotatory evaporation.The collected light yellow oil was dissolved in dichloromethane(10 mL). The 2-(chloromethyl)-3,4-dimethoxypyridinesolution in dichloromethane was added dropwise to a solution of N,N0-dimethylethylenediamine (0.503 mL, 4.67 mmol) in dichloromethane(15 mL). In the next step aqueous 1 M sodium hydroxide(10 mL) was slowly added and solution was stirred for additional60 h at room temperature. After 60 h of stirring followed by therapid addition of a second fraction of aqueous 1 M sodium hydroxide(10 mL, 10 mmol), the product was extracted with dichloromethane(3 25 mL). The combined organic layers were driedover anhydrous sodium sulfate and filtered. Subsequently, theexcess solvent was evaporated by vacuum to afford yellow colorviscous oil (1.86 g, Yield 89%). 1H NMR (500 MHz, Methanol-d4) d8.14 (d, 2H, pyridine ring), 7.05 (d, 2H, pyridine ring), 3.95 (s,6H,-O-CH3-Py), 3.85 (s, 6H,-O-CH3-Py), 3.66 (s, 4H,-N-CH2-Py),2.67 (s, 4H, -CH2-CH2-), 2.26 (s, 6H, -N-CH3). 13C NMR (126 MHz,Methanol-d4) d 160.77, 152.19, 147.28, 146.07 (d, J = 10.3 Hz),108.87, 61.40, 58.17, 56.43, 56.07, 43.10. ESI-MS (in CH3OH).observed m/z 391.3 [(L2 + H)+] (z = 1); theoretical-391.23[(L2 + H)+] (z = 1). IR (cm1): 3375, 2945, 1626, 1584, 1447, 1425,1261, 1228, 1173, 1073, 994, 828, 651, 603.

As the paragraph descriping shows that 110-70-3 is playing an increasingly important role.

Reference£º
Article; Singh, Nirupama; Niklas, Jens; Poluektov, Oleg; Van Heuvelen, Katherine M.; Mukherjee, Anusree; Inorganica Chimica Acta; vol. 455; (2017); p. 221 – 230;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

110-70-3, N1,N2-Dimethylethane-1,2-diamine is a chiral-nitrogen-ligands compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Add in a 100mL single-mouth bottleN1,N2-dimethylethyl-1,2-diamine (4g, 45mmol), cooled to about 0 C in an ice bath,Then (Boc) 2O (5 g, 23 mmol) in DCM (20 mL)The temperature was raised to 25 C and the reaction was stirred for 4 h.Concentrated under reduced pressure, a saturated sodium carbonate solution was added to the residue, and extracted three times with ethyl acetate (30 mL¡Á3).The organic phase was combined, washed three times with saturated brine (20 mL¡Á3) and dried over anhydrous sodiumThe mixture was suction filtered under reduced pressure, and the filtrate was evaporated.The crude product was purified by column chromatography eluting with EtOAc EtOAcConcentration under reduced pressure gave 2.1 g of a yellow oil.

As the paragraph descriping shows that 110-70-3 is playing an increasingly important role.

Reference£º
Patent; Beijing Purunao Bio-technology Co., Ltd.; Zhang Peilong; Shi Hepeng; Lan Wenli; Song Zhitao; (250 pag.)CN108707139; (2018); A;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

110-70-3, N1,N2-Dimethylethane-1,2-diamine is a chiral-nitrogen-ligands compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

The ligand BPMEN was synthesized via a previouslyreported procedure (Singh et al. 2017). A solution of potassiumcarbonate (5.1 g, 37 mmol) in 15 mL water was dropwiseadded to the aqueous solution of 2-(chloromethyl)-pyridine hydrochloride (3 g, 18.3 mmol in 10 mL). Afterabout 30 min of stirring at room temperature, the reactionmixture was extracted with dichloromethane (3 ¡Á 20 mL).The combined organic extracts were dried over anhydroussodium sulfate. The solution was filtered, and the solventwas removed under vacuum. The resulted residue was thendissolved in dichloromethane (10 mL). The above solutionwas added dropwise to a solution of N,N?-dimethylethylenediamine(0.942 mL, 8.75 mmol) in dichloromethane(25 mL). After this addition, 20 mL of aqueous sodiumhydroxide (1 M) was added slowly and the reaction mixturewas stirred for next 60 h at room temperature. After stirringwas finished, another fraction of sodium hydroxide (20 mL,1 M) was added rapidly. The reaction mixture was extractedwith dichloromethane (3 ¡Á 50 mL) and the combined organicportion was dried over anhydrous sodium sulfate. Evaporationof solvent led to isolation of the ligand BPMEN as adark orange oil. (2.1 g, Yield – 89%) 1H NMR (500 MHz,Methanol-d4) delta 8.45 (d, 2H, pyridine ring), 7.76 (m, 2H, pyridinering), 7.52 (d, 2H, pyridine ring), 7.30 (m, 2H, pyridinering), 3.67 (s, 4H, -N-CH2-Py), 2.63 (s, 4H, -CH2-CH2-),2.26 (s, 6H, N-CH3). ESI-MS+: [BPMEN + H]+ = 271.15 m/z+ (experimental) 271.19 m/z+ (theoretical).

The synthetic route of 110-70-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Botcha, Niharika Krishna; Gutha, Rithvik R.; Sadeghi, Seyed M.; Mukherjee, Anusree; Photosynthesis Research; vol. 143; 2; (2020); p. 143 – 153;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

110-70-3, N1,N2-Dimethylethane-1,2-diamine is a chiral-nitrogen-ligands compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

The ligand L1 was synthesized via previously reported procedure[23]. A solution of potassium carbonate (2.55 g, 18.45 mmol)in 10 mL water was dropwise added to the aqueous solution of 2-(chloromethyl)-pyridine hydrochloride (1.5 g, 9.15 mmol in10 mL). After about 30 min. of stirring at room temperature, thereaction mixture was extracted with dichloromethane(3 20 mL). The combined organic extracts were dried over anhydroussodium sulfate. The solution was filtered and the solvent wasremoved under vacuum. The resulted residue was then dissolvedin dichloromethane (10 mL). The dichloromethane solution of 2-chloromethyl-pyridine was added dropwise to a solution of N,N0-dimethylethylenediamine (0.471 mL, 5.34 mmol) in dichloromethane(15 mL). After this addition, 10 mL of aqueous sodiumhydroxide (1 M) was added slowly and the reaction mixture wasstirred for next 60 h at room temperature. After stirring was finished,another fraction of sodium hydroxide (10 mL, 1 M) wasadded rapidly. The reaction mixture was extracted with dichloromethane(3 25 mL) and combined organic portion was dried overanhydrous sodium sulfate. Evaporation of solvent led to isolationof the ligand L1 as a dark orange oil. (1.13 g, Yield 79%) 1H NMR(500 MHz, Methanol-d4) d 7.27 (m, 2H, pyridine ring), 7.50 (d,2H, pyridine ring), 7.76 (m, 2H, pyridine ring), 8.45 (d, 2H, pyridinering), 3.68 (s, 4H, -N-CH2-Py), 2.63 (s, 4H, -CH2-CH2-), 2.26 (s, 6H,N-CH3). IR (cm1): 2945, 2789, 1589, 1569, 1472, 1432, 1360,1304, 1146, 1090, 1031, 994, 635, 614, 418.

As the paragraph descriping shows that 110-70-3 is playing an increasingly important role.

Reference£º
Article; Singh, Nirupama; Niklas, Jens; Poluektov, Oleg; Van Heuvelen, Katherine M.; Mukherjee, Anusree; Inorganica Chimica Acta; vol. 455; (2017); p. 221 – 230;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

110-70-3, N1,N2-Dimethylethane-1,2-diamine is a chiral-nitrogen-ligands compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A single-neck RBFequipped with a magnetic stirrer was charged with methyl2-bromo-2-(4-nitrophenyl)acetate (3,7.33 g, 26.74 mmol) and EtOH (80 mL). After cooling to 0 C in an ice/waterbath. N,N?-dimethylethane-1,2-diamine (23 g, 0.26 mol) was added to the solution over 5 min. Theresulting solution was stirred at 0 C to 25 C overnight. After evaporation invacuo, the crude mixturewas purified on a silica gel column (MeOH: DCM = 10: 90) to afford compound 4 as a yellow solid (6.70 g, 100%).

As the paragraph descriping shows that 110-70-3 is playing an increasingly important role.

Reference£º
Article; Young, Wendy B.; Barbosa, James; Blomgren, Peter; Bremer, Meire C.; Crawford, James J.; Dambach, Donna; Gallion, Steve; Hymowitz, Sarah G.; Kropf, Jeffrey E.; Lee, Seung H.; Liu, Lichuan; Lubach, Joseph W.; Macaluso, Jen; Maciejewski, Pat; Maurer, Brigitte; Mitchell, Scott A.; Ortwine, Daniel F.; Di Paolo, Julie; Reif, Karin; Scheerens, Heleen; Schmitt, Aaron; Sowell, C. Gregory; Wang, Xiaojing; Wong, Harvey; Xiong, Jin-Ming; Xu, Jianjun; Zhao, Zhongdong; Currie, Kevin S.; Bioorganic and Medicinal Chemistry Letters; vol. 25; 6; (2015); p. 1333 – 1337;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.110-70-3,N1,N2-Dimethylethane-1,2-diamine,as a common compound, the synthetic route is as follows.

1,4-Dimethyl-3-(4-nitrophenyl)piperazin-2-one (3); A 100-mL single-neck round-bottomed flask equipped with a magnetic stirrer was purged with nitrogen, charged with N1,N2-dimethylethane-1,2-diamine (1.61 g, 18.2 mmol), ethanol (5 mL) and 2 (500 mg, 1.82 mmol), and the reaction was stirred at room temperature for 1 h. After this time, the reaction mixture was evaporated under reduced pressure, and the resulting residue was purified by flash column chromatography to afford an 89% yield (404 mg) of 3 as a yellow oil: 1H NMR (500 MHz, DMSO-d6) delta 8.18 (d, 2H, J=8.5 Hz), 7.60 (d, 2H, J=8.5 Hz), 3.87 (s, 1H), 3.61 (td, 1H, J=12.0, 4.0 Hz), 3.26 (ddd, 1H, J=12.0, 4.0, 2.5 Hz), 3.02 (ddd, 1H, J=12.0, 4.0, 2.5 Hz), 2.84 (s, 3H), 2.64 (td, 1H, J=12.0, 4.0 Hz), 2.06 (s, 3H).

The synthetic route of 110-70-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Zhao, Zhongdong; Zhichkin, Pavel E.; Stafford, Douglas G.; Kropf, Jeffrey E.; BLOMGREN, Peter A.; Currie, Kevin S.; Lee, Seung H.; Mitchell, Scott A.; Xu, Jianjun; Schmitt, Aaron C.; US2009/82330; (2009); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis